Angela Sasic Kalagasidis

2025

Dynamics of Contaminant Flow Through Porous Media Containing Random Adsorbers

2025

Sustainable Heat Generation in Flow from a Molecular Solar Thermal Energy Storage System

A Small-Scale Test Setup for Measurement of Moisture in Wall Assemblies During Runoff Wetting and Drying

2025

Rebuttal to Correspondence on “Theoretical Threshold for Estimating the Impact of Ventilation on Materials’ Emissions”

2024

Theoretical Threshold for Estimating the Impact of Ventilation on Materials’ Emissions

2024

Drying of an aerogel-based coating system in Swedish climates: Field tests and simulations

2024

Critical perspectives on life cycle building performance assessment tool reviews

Hållbara putssystem kräver kunskap om uttorkning – erfarenheter från tester av aerogelbaserade putssystem

2024

Evaluation of an immersed boundary numerical framework to address the wind field in complex urban topographies

2023

Moisture absorption of an aerogel-based coating system under different wetting scenarios

2023

Modelling VOC levels in a new office building using passive sampling, humidity, temperature, and ventilation measurements

2023

Transition from diffusion to advection controlled contaminant adsorption in saturated chemically heterogeneous porous subsurfaces

2023

Quantification of overlapping heating and cooling demand for the feasibility assessment of bi-directional systems over Europe

2023

Roadmaps for heating and cooling system transitions seen through uncertainty and sensitivity analysis

2023

Experimental study on the capillary water absorptivity of an aerogel-based coating mortar under subsequent drying and wetting cycles

Addressing wind comfort in an urban area using an immersed boundary framework

2022

Thermo-optical performance of molecular solar thermal energy storage films

2022

A Characterisation Framework for Parametric Building Performance Simulation Tools

2022

Feasibilities of utilizing thermal inertia of district heating networks to improve system flexibility

Duration of Early Stage Drying of Aerogel-based Renders: Field Tests and Simulations in Four Swedish Cities

2022

Tool characterisation framework for parametric building LCA

2022

Assessment of district heating and cooling systems transition with respect to future changes in demand profiles and renewable energy supplies

2022

Increasing Water Absorptivity of an Aerogel-Based Coating Mortar in Subsequent Wetting and Drying

Superisolerande puts ett steg närmare verklighet i Sverige – erfarenheter från fältförsök

2022

Knowledge gaps regarding the hygrothermal and long-term performance of aerogel-based coating mortars

Validation of an immersed boundary framework for urban flows

2021

Hygro-thermal model for estimation of demand response flexibility of closed refrigerated display cabinets

2021

Co-Heating method for thermal performance evaluation of closed refrigerated display cabinets

2021

Exploratory investigation of return air temperature sensor measurement errors in refrigerated display cabinets

2021

Techno-economic assessment of thermal energy storage technologies for demand-side management in low-temperature individual heating systems

2021

Contribution of dynamic capillary pressure to rainfall infiltration in thin homogeneous growth substrates

2021

Determination of the anisotropic thermal conductivity of an aerogel-based plaster using transient plane source method

2021

Applicability of thermal energy storage in future low-temperature district heating systems – Case study using multi-scenario analysis

2020

Super insulation plasters in renovation of buildings in Sweden: energy efficiency and possibilities with new building materials

2020

Early-stage concentrations of formaldehydes and TVOCs in a new low-energy building

2020

On the impact of porous media microstructure on rainfall infiltration of thin homogeneous green roof growth substrates

2020

Effect of phase separation and supercooling on the storage capacity in a commercial latent heat thermal energy storage: Experimental cycling of a salt hydrate PCM

Aerogelbaserad puts- Superisolering för framtiden

Thermal energy storage using phase change materials: Techno-economic evaluation of a cold storage installation in an office building

2019

Long-term Performance of Silica Aerogel and Aerogel Based Composites: A Literature Review Highlighting Pathways for Further Studies

Design tool for thermal energy storage in buildings

2019

Numerical Simulations and Empirical Data for the Evaluation of Daylight Factors in Existing Buildings in Sweden

Economic feasibility of building retrofitting mitigation potentials: Climate change uncertainties for Swedish cities

Energy Performance Modelling: Introducing the Building Early-stage Design Optimization Tool (BeDOT)

En introduktion till dagvattenflödesmodellering i gröna tak

Optimization of Night Cooling of Commercial Premises Using Genetic Algorithms and Neural Networks

2018

Contributions of Building Retrofitting in Five Member States to EU Targets for Energy Savings

2018

Characterizing phase change materials using the T-History method: On the factors influencing the accuracy and precision of the enthalpy-temperature curve

2017

The HSB Living Lab harmonization cube

2017

Next Generation Living Labs: Comprehensive Report

An optimum renovation strategy for Swedish single-family house envelopes: The implication of climate zones and the age of the houses

2017

The Implications of Climate Zones on the Cost-Optimal Level and Cost-Effectiveness of Building Envelope Energy Renovation and Space Heat Demand Reduction

Correction of the enthalpy–temperature curve of phase change materials obtained from the T-History method based on a transient heat conduction model

Hygrothermal performance of a vapor-open envelope for subtropical climate, field test and model validation

2016

Drying potential of cold attic using natural and controlled ventilation in different Swedish climates

Simulating wind-driven rain on building facades using Eulerian multiphase with rain phase turbulence model

Design evaluation and improvements of a latent heat based thermal energy storage system

2016

Evaluation of a modified co-heating test for in-situ measurements of thermal transmittance of single family houses

Effective and robust energy retrofitting measures for future climatic conditions—Reduced heating demand of Swedish households

Tak i urbana miljöer för att minska risken för översvämning vid skyfall

Evaluation of 5 years’ performance of VIPs in a retrofitted building façade

2015

Annex 55, Reliability of Energy Efficient Building Retrofitting - Probability Assessment of Performance and Cost, (RAP-RETRO): Framework for probabilistic assessment of performance of retrofitted building envelopes

2015

Investigating PCM activation using transient plane source method

Modelling opportunities and costs associated with energy conservation in the Spanish building stock

2015

Assessing the efficiency and robustness of the retrofitted building envelope against climate change

2015

Effect smart solutions for district heating networks based on energy storage in buildings. Impact on indoor temperatures

Future moisture loads for building facades in Sweden: Climate change and wind-driven rain

2015

Cost-effective retrofitting of Swedish residential buildings: effects of energy price developments and discount rates

Vakuumisoleringspaneler i gamla byggnader

A statistical method for comparing different retrofitting measures of buildings and evaluating their robustness against climate change

2014

Hygrothermal Risk Assessment - Retrofit of External Wall by the Application of Interior Insulation

2014

The multiphysics modeling of heat and moisture induced stress and strain of historic building materials and artefacts

2014

Moisture safe cold attics - Assessment based on risk analyses of performance and cost

Boda mill – A Meeting Point for Renewable Energy systems

2014

Retrofitting a brick wall using vacuum insulation panels: measured hygrothermal effect on the existing structure

2014

Wind Driven Rain and Climate Change: A Simple Approach for the Impact Assessment and Uncertainty Analysis

2014

Strategy for visualisation of the activity of phase change materials by transient plane source technique

Riskbedömningar och råd med fuktsäkra kallvindar

Design challenges and solutions for the renovation of residential buildings. Experience based on a number of retrofitting projects in west Sweden from 2008-2010

2014

Retrofitting of a listed brick and wood building using vacuum insulation panels on the exterior of the facade: Measurements and simulations

2014

Air leakages in a retrofitted building from 1930: measurements and numerical simulations

2014

Building-Stock Aggregation through Archetype Buildings: France, Germany, Spain and the UK

2014

A multi-level modelling and evaluation of thermal performance of phase change materials in buildings

2014

Interior insulation retrofit of a historical brick wall using vacuum insulation panels: Hygrothermal numerical simulations and laboratory investigations

2013

Interior Insulation Retrofit of a Brick Wall Using Vacuum Insulation Panels: Design of a Laboratory Study to Determine the Hygrothermal Effect on Existing Structure and Wooden Beam Ends

Impact study of the climate change on the energy performance of the building stock in Stockholm considering four climate uncertainties

2013

Description of the European building stock through archetype buildings

Climate Change and Wind-Driven Rain – a Preliminary Study about Climate Uncertainties

2013

Energy usage and technical potential for energy saving measures in the Swedish residential building stock

Fuktsäkra kallvindar – bedömning utifrån riskanalyser av funktion och kostnad

2013

A modelling strategy for energy, carbon, and cost assessments of building stocks.

Statistical methods for assessing and analysing the building performance in respect to the future climate

Assessment of hygrothermal performance and mould growth risk in ventilated attics in respect to possible climate changes in Sweden

NUMERICAL SIMULATION OF TRANSIENT MOISTURE TRANSPORT FOR HYGROSCOPIC INERTIA ASSESSMENT

2012

Bottom-up characterization of the Spanish building stock for energy assessment and model validation

Simulation of heat and moisture induced stress and strain of historic building materials

2011

A bottom-up model for energy, carbon and costs assessment of building stocks

2011

Costs of retrofit measures in Swedish residential building stock – an evaluation for three scenarios on future energy prices

Energy efficiency strategies in the residential building stock

Energieffektiviseringar – vilka risker finns och hur ska de hanteras?

INFLUENCE OF THE UNCERTAINTIES IN FUTURE CLIMATE SCENARIOS ON THE HYGRO-THERMAL SIMULATION OF AN ATTIC

2010

Assessment of retrofit measures for reduced energy use in residential building stocks– Simplified costs calculation

STATISTICAL METHODS FOR ASSESSMENT OF LONG-TERM HYGRO-THERMAL PERFORMANCE OF BUILDINGS

2010

Retrofitting measures for energy savings in the Swedish residential building stock – assessing methodology

Mold Growth Control in Cold Attics through Adaptive Ventilation: Validation by Field Measurements

Description of the building-stock model ECCABS: Energy, Carbon and Cost Assessment of Building Stocks.

Mould Growth Control in Cold Attics through Adaptive Ventilation. Validation by Field Measurements

Hygro-thermal response of a ventilated attic to the future climate load in Sweden

From EMPD to CFD – overview of different approaches for Heat Air and Moisture modeling in IEA Annex 41

2009

Calculation of the energy use in the Swedish housing. Description of the building energy simulation model: EABS Energy Assessment of Building Stocks.

Hygro-thermal response of a ventilated attic to the future climate load in Sweden

Styrd ventilation av kallvindar – Uppföljning av fältförsök

Condensation and moisture transport in cold roofs: effects of roof underlay

2009

Modelling energy efficiency scenarios for the European building stock

Assessing possibilities of moisture management in buildings using simulation tools

Further development of the theory of Dynamic Thermal Networks for the application in building energy simulations

Mould growth control in cold attics through adaptive ventilation

Long term simulation of the hygro-thermal response of buildings - Results and questions

Simulating the Energy Benefits and Reduction in Condensation Formation that is obtained from Houses with Cold Pitched Roofs

IEA Annex 41, MOIST-ENG. 2008. Final report.

Mould growth control in cold attics through adaptive ventilation

From EMPD to CFD - overview of different approaches for Heat, Air and Moisture modelling in IEA Annex 41

HAM-Tools – a whole building simulation tool in Annex 41. IEA Annex 41 closing seminar.

Effect of climate change on energy consumption in buildings

Sustainability of the Swedish built environment towards climate change. Hygro-thermal effects and design criteria for buildings with respect to future climate scenarios

Simulations as the way of bridging the gaps between desired and actual building performance

The International Building Physics Toolbox in Simulink

An airtight building – from a design concept to the performance achieved

The use of HAM tools versus the traditional steady-state methods in the aspect of quantification of probability of undesired moisture conditions.

Upgraded weather forecast control of building heating systems

2006

ENLOSS testing with HAM-Tools. SMHI Common exercise 0. Calculation of energy use for space heating

A Simulation Tool for Temperature and Moisture Dependent Transport of VOC's in Buildings

Konsekvenser av luftrörelser på vindsbjälklaget

THE EFFICIENCY OF A DYNAMICALLY INSULATED WALL IN THE PRESENCE OF AIR LEAKAGES

Benchmarks for One-dimensional Cases of Combined Heat, Air and Moisture Transport in Building Components

The whole model validation for HAM-Tools—case study: Hygrothermal conditions in a cold attic under different ventilation regimes

Air transport in and through the building envelope

Assessment Method of Numerical Prediction Models for Combined Heat, Air and Moisture Transfer in Building Components. Benchmarks for One-dimensional Cases

2004

HAM-Tools - An Integrated Simulation Tool for Heat, Air and Moisture Transfer Analyses in Building Physics

The whole model validation for HAM-Tools. Case study: hygro-thermal conditions in the cold attic under different ventilation regimes.

The evaluation of the interface moisture conductivity between control volumes. Comparison between linear, harmonic and integral averaging

Presentation of the international building physics toolbox for Simulink

The influence of air transport in and around the building envelope on energy efficiency of the building

2002

Simulink modelling tool for HAM system analyses in building physics