Luping Tang

2025

Non-destructive lab-scale monitoring of carbonation propagation in cementitious systems using the measurement of intrinsic electrical property

2025

Effect of curing regimes on composition and microstructure of blended pastes: Insight into later-age hydration mechanism

Durability study of seawater and sea-sand concrete under the combined effects of carbonation and chloride redistribution

2024

Hållfasthetsutveckling och uttorkning av betong - Test av mätmetodik med sensorer i flera nivåer

2024

Carbon enhanced cementitious coatings: Alternative anode materials for impressed current cathodic protection systems intended for reinforced concrete

Effects of limestone calcined clay, fly ash and seawater on early hydrating behavior, mechanical properties, microscopic performance and sustainability of eco-friendly cement-based pastes

RILEM recommendation from TC 289-DCM: guideline for designing and operating long-term marine exposure sites

Nickel cobalt sulfide composite nanosheet anchored on rGO as effective electrode for quasi-solid supercapacitor

2023

Long-term (2 years) drying shrinkage evaluation of alkali-activated slag mortar: Experiments and partial factor analysis

Synthesis of geopolymer using municipal solid waste incineration fly ash and steel slag: Hydration properties and immobilization of heavy metals

2023

Improving the performance of alkali-activated slag mortar with electro/chemically treated carbon fiber textile

Research on the durability and Sustainability of an artificial lightweight aggregate concrete made from municipal solid waste incinerator bottom ash (MSWIBA)

Experimental study on chloride ion diffusion behavior and microstructure in concrete under alternating ambient humidity conditions

2023

Long-term performance of reinforced concrete under a de-icing road environment

Exploring the carbon capture and sequestration performance of biochar-artificial aggregate using a new method

Effects of chloride content on early hydration performance of cement pastes

2023

Non-destructive test system to monitor hydration and strength development of low CO2 concrete

The toxic leaching behavior of MSWI fly ash made green and non-sintered lightweight aggregates

New applications of municipal solid waste incineration bottom ash (MSWIBA) and calcined clay in construction: Preparation and use of an eco-friendly artificial aggregate

Determining the influence of LC2 and FA on the iodide diffusion coefficient of in seawater and sea sand concrete: A novel modified RIM test method

Numerical and experimental analysis of chloride and iodide transports in concrete under natural diffusion

2023

Distribution and dynamics of water in the blended pastes unraveled by thermoporometry and dielectric properties

2023

Using water vapour and N2 isotherms to unveil effects of SCMs on nanopores and evaluate hydration degree

Electrically driven ionic transport in the RCM and RIM: Investigations based on experiments and numerical simulations

Co-utilization of quarry tailings and fly ash for non-sintered ultra-lightweight aggregates (ULWAs) by autoclave technology

Valorization of municipal solid waste incineration bottom ash (MSWIBA) into cold-bonded aggregates (CBAs): Feasibility and influence of curing methods

2022

Evolution of Microstructural Characteristics of Carbonated Cement Pastes Subjected to High Temperatures Evaluated by MIP and SEM

Resource utilization of municipal solid waste incineration fly ash - cement and alkali-activated cementitious materials: A review

Novel recycling application of high volume municipal solid waste incineration bottom ash (MSWIBA) into sustainable concrete

Application potential analysis of biochar as a carbon capture material in cementitious composites: A review

Long-term field exposure of structural concretes in marine environment: state-of-the-art review by RILEM TC 289-DCM

2022

New insights into the reaction of tricalcium silicate (C<inf>3</inf>S) with solutions to the end of the induction period

2022

Moisture and ion transport properties in blended pastes and their relation to the refined pore structure

2022

Real-time monitoring the electrical properties of pastes to map the hydration induced microstructure change in cement-based materials

Effects of different supplementary cementitious materials on the performance and environment of eco-friendly mortar prepared from waste incineration bottom ash

Alkali-activated binders based on incinerator bottom ash combined with limestone-calcined clay or fly ash

An experimental study on the influence of continuous ambient humidity conditions on relative humidity changes, chloride diffusion and microstructure in concrete

2022

Effects of Temperature on Corrosion Behavior of Reinforcements in Simulated Sea-Sand Concrete Pore Solution

The impact of cold-bonded artificial lightweight aggregates produced by municipal solid waste incineration bottom ash (MSWIBA) replace natural aggregates on the mechanical, microscopic and environmental properties, durability of sustainable concrete

2022

Iodide and chloride ions diffusivity, pore characterization and microstructures of concrete incorporating ground granulated blast furnace slag

Assessment of compositional changes of carbonated cement pastes subjected to high temperatures using in-situ Raman mapping and XPS

2022

Mechanics, hydration phase and pore development of embodied energy and carbon composites based on ultrahigh-volume low-carbon cement with limestone calcined clay

Mechanical properties and mechanisms of alkali-activated slag paste reinforced by graphene oxide-SiO<inf>2</inf> composite

Resourceful utilization of quarry tailings in the preparation of non-sintered high-strength lightweight aggregates

2021

Geopolymer recycled aggregate concrete: From experiments to empirical models

Effect of silica fume on the mechanical property and hydration characteristic of alkali-activated municipal solid waste incinerator (MSWI) fly ash

Chloride penetration in freeze–thaw induced cracking concrete: A numerical study

Utilisation of municipal solid waste incinerator (MSWI) fly ash with metakaolin for preparation of alkali-activated cementitious material

2021

Rechargeable concrete battery

The manner and extent to which the hydration shell impacts interactions between hydrated species

Chemical and mineralogical characteristics of carbonated and uncarbonated cement pastes subjected to high temperatures

Durability of Slag-Cement Paste Containing Polyaluminum Chloride

Numerical model of the effect of water vapor environment on the chloride transport in concrete

Influence of deicing salt on the surface properties of concrete specimens after 20 years

2021

Investigation of using limestone calcined clay cement (LC3) in engineered cementitious composites: The effect of propylene fibers and the curing system

Modelling analysis of chloride redistribution in sea-sand concrete exposed to atmospheric environment

Influence of moisture content on the contact-hardening properties of calcium silicate hydrate by direct compression

2020

Effect of the addition of GGBS on the frost scaling and chloride migration resistance of concrete

New Insights into the Role of Portlandite in the Cement System: Elastic Anisotropy, Thermal Stability, and Structural Compatibility with C-S-H

Temperature evolution during the compaction of calcium silicate hydrate powders using a compression calorimeter

2020

Activation of municipal solid waste incineration ashes for green concrete

Recycling and re-purposing decommisioned construction polymer composites for construction applications

Changes in chemical phases and microscopic characteristics of fly ash blended cement pastes in different CO<inf>2</inf> concentrations

FShrinkage behaviour, early hydration and hardened properties of sodium silicate activated slag incorporated with gypsum and cement

Tensile behaviour of carbon fabric reinforced cementitious matrix composites as both strengthening and anode materials

Determination of impressed current efficiency during accelerated corrosion of reinforcement

2020

On the Mechanical Recycling of Decommisioned Insulation Polymer Composite Components

Electrical monitoring of concrete using a novel structural sensor based on conductive cementitious mortar

2020

Monitoring and Interpreting the Early Properties of Alkali-Activated Materials by Electrical Conductivity Measurement

Nanoengineering Microstructure of Hybrid C-S-H/Silicene Gel

Improved Interfacial Bonding Strength and Reliability of Functionalized Graphene Oxide for Cement Reinforcement Applications

2020

Carbonation of the synthetic calcium silicate hydrate (C-S-H) under different concentrations of CO2: Chemical phases analysis and kinetics

2020

Slag Blended Cement Paste Carbonation under Different CO(2)Concentrations: Controls on Mineralogy and Morphology of Products

Improving the chloride binding capacity of cement paste by adding nano-Al2O3: The cases of blended cement pastes

GRAPHENE EMBEDDED BITUMINOUS ROADS: A NEW LOOK INTO THE DESIGN OF COMPLEX NANOCOMPOSITES

2019

XRD and( 29)Si MAS NMR study on carbonated cement paste under accelerated carbonation using different concentration of CO2

2019

Application of CFRP as anode in cathodic protection for steel reinforced concrete - A review

Interaction mechanisms between organic and inorganic phases in calcium silicate hydrates/poly(vinyl alcohol) composites

Water distribution modelling of capillary absorption in cementitious materials

Investigating the influence of fly ash on the hydration behavior of cement using an electrochemical method

2019

Synthesis and Properties of Red Mud-Based Nanoferrite Clinker

Analysis methodology of XCT results for testing ingress of substances in hardened cement paste: Explained with chloride immersion test

2018

Effect of the paste–anode interface under impressed current cathodic protection in concrete structures

2018

Contact-hardening behavior of calcium silicate hydrate powders

Influence of Hydrothermal Synthesis Conditions on the Formation of Calcium Silicate Hydrates: from Amorphous to Crystalline Phases

2018

Electrochemical properties of oxide scale on steel exposed in saturated calcium hydroxide solutions with or without chlorides

Predicting degradation of the anode-concrete interface for impressed current cathodic protection in concrete

2018

Experiences from RILEM TC 235-CTC in recommending a test method for chloride threshold values in concrete

Influence of drying conditions on the contact-hardening behaviours of calcium silicate hydrate powder

Concrete setting and hardening monitoring using a novel graphene-based sensor

Performance of Concrete Subjected to Severe Multiple Actions of Composite Salts Solution under Wet-Dry Cycles and Flexural Loading in Lab

Possible pitfall in sample preparation for SEM analysis - A discussion of the paper “Fabrication of polycarboxylate/graphene oxide nanosheet composites by copolymerization for reinforcing and toughening cement composites” by Lv et al.

Corrosion induced stress field and cracking time of reinforced concrete with initial defects: Analytical modeling and experimental investigation

Resistance of concrete against combined attack of chloride and sulfate under drying-wetting cycles

2016

Predicting chloride induced depassiviation and minimum concrete cover with different binders

Carbon fiber as anode material for cathodic prevention in cementitious materials

2016

Evaluation of Durability of Concrete with Mineral Additions with regard to Chloride-Induced Corrosion

Developing an engineering approach for migrating from prescriptive to performance-based specification for concrete

Taking performance to practice – simplified in situ approach for specifying concrete for chloride environments

Development of an electro-chemical accelerated ageing method for leaching of calcium from cementitious materials

2015

Corrosion initiation in cracked fibre reinforced concrete: Influence of crack width, fibre type and loading conditions

Time-dependent Probability Assessment for Chloride Induced Corrosion of RC Structures Using the Third-Moment Method

The performance of concrete exposed to marine environments: Predictive modelling and use of laboratory/on site test methods

2015

Parameters influencing the initial setting time of alkali-activated ground granulated blastfurnace slag materials

2015

Durability and service life prediction of reinforced concrete structures

Alkali-activated slag foamed concrete with lightweight glass aggregates

2015

Polarization induced deterioration of reinforced concrete with CFRP anode

2015

Physical and Mechanical Properties of Cementitious Specimens Exposed to an Electrochemically Derived Accelerated Leaching of Calcium

The influence of reinforcement steel surface condition on initiation of chloride induced corrosion

2015

Pb2+ adsorption by calcium silicate hydrate synthesized from steel slag

2014

A Novel Anode Material for Cathodic Prevention of Steel Reinforced Concrete Structures with Hybrid Functions

Influence of inorganic admixtures on the 11 angstrom-tobermorite formation prepared from steel slags: XRD and FTIR analysis

Chloride ingress in concrete – Results from over 20 years’ field exposure in Swedish marine environment

2014

Pre-Study of Graphene-Enhanced Cementitious Materials

2014

Mineralogical, Physical and Chemical Characterization of Cementitious Materials Subjected to Accelerated Decalcification by an Electro-Chemical Method

Estimation of chloride threshold values after 20 years’ field exposure in Swedish marine environment

The Initial Setting Time of Ground Granulated Blastfurnace Slag GGBS and Its Relation to the Modulus of the Alkali-Activating Solution

The Influence of Silica Species Configuration on the Hydration of Alkali-Activated Ground Granulated Blast-Furnace Slag

Study of the possibilities of using Red Mud as an additive in concrete and grout mortar

Chloride Penetration Resistance of Calcium Depleted Concrete Specimens

The Initial Setting Time of Ground Granulated Blastfurnace Slag GGBS and Its Relation to the Modulus of the Alkali-Activating Solution

High-strength lightweight blocks prepared from the by-product of aluminium removed from fly ash

An approach for measurement of chloride threshold

Application of LA-ICP-MS for meso-scale chloride profiling in concrete

2013

Electrochemical migration technique to accelerate ageing of cementitious materials

Chloride profiles along the concrete-steel interface

2013

Validation of models for prediction of chloride ingress in concrete exposed in de-icing salt road environment

A Study of Consequences of Concrete Structures for Storage of Nuclear Wastes due to Permafrost

2012

Ageing process of cementitious materials: Ion transport and diffusion coefficient

The introduction of Key Performance Indicators (KPI) for predicting the state of health

2012

Covercrete with hybrid functions – A novel approach to durable reinforced concrete structures

Critical Conditions for Depassivation of Steel in Concrete: Interface Chloride Profiles and Steel Surface Condition

Validation of models and test methods for assessment of durability of concrete structures in the road environment

Chloride analysis in concrete by LA-ICP-MS

Validation of models for assessment of durability of concrete structures exposed in chloride environments

Resistance of Concrete to Chloride Ingress – Testing and Modelling

A study of the accelerated ageing process of cementitious materials

Freeze/Thaw durability of concrete with fly ash

Critical Conditions for Depassivation of Steel in Concrete: Interface Chloride Profiles

Electrochemical leaching of cementitious materials: an experimental and theoretical study

Ageing of cementitious materials for storage of nuclear waste

Use of performance specification and predictive model for concretes exposed to a marine environment

Some Questions in Modelling of Service Life of Concrete Structures with Regard to Frost Attack

An approach for measurement of chloride threshold values

CHLORIDE CONTENTS AT THE CONCRETE-STEEL INTERFACE

Methodology for designing structures to withstand extreme environments: Performance based specifications

Validation of models for assessment of durability of concrete structures exposed in the chloride road environment

A critical review of proportioning techniques for self-compacting concrete

A field study of critical chloride content in reinforced concrete with blended binder

Modelling of service life for a concrete structure exposed to seawater for 30 years

Resources for the city: sustainable use of bedrock resources for concrete production with examples from Sweden

Chloride ingress and corrosion from the Swedish field exposures under the marine environment

The effects of mineral additions on chloride penetration into concrete under the frost action

Non-destructive assessment of corrosion conditions of steel in reinforced concrete structures using a rapid technique

Applications of a rapid non-destructive technique in assessment of corrosion conditions of steel in reinforced concrete structures

Engineering expression of the ClinConc model for prediction of free and total chloride

Verification of a rapid technique for corrosion measurement using reinforced concrete slabs after long-term field exposure

Chloride induced corrosion of steel in concrete exposed in a marine environment

On the mathematics of time-dependent apparent chloride diffusion coefficient in concrete

A comparison of two methods for testing the resistance of fresh scc to segregation

A study of proportioning techniques for SCC with crushed aggregate

Chloride ingress in portland cement concrete under frost action

Evaluation of different laboratory methods for testing resistance of concrete to chloride ingress

Chloride penetration in concrete exposed under different temperatures

Service-life prediction based on the rapid migration test and the ClinConc model

Assessment of reinforcement corrosion in a concrete highway tunnel

A rapid technique for detecting corrosion of steel in reinforced concrete

A Rapid Technique Using Handheld Instrument for Mapping Corrosion of Steel in Reinforced Concrete

Prediction of Chloride Ingress into Concrete - Verifications from the Field Exposure

Probablistic service life design for concrete structures in marine and road environments

Durability of Concrete in Marine Environment - Over 10 Years' Traceable Evaluation of Chloride Ingress

Chloride-induced corrosion of reinforcement in concrete – Verification of a non-destructive measurement technique

A Procedure for Verification of Models used to predict Chloride Ingress into Concrete

Chloride induced corrosion in concrete structures – Testing and modelling

Chloride Penetration Profiles and Diffusivity in Concrete under Different Exposure Conditions

Chloride Transport in Concrete - Measurement and Prediction