Fluorescence lidar imaging of fungal growth on high-voltage outdoor composite insulators
Artikel i vetenskaplig tidskrift, 2005
Remote fluorescence imaging of fungal growth on polymeric high-voltage insulators was performed using a mobile lidar system with a laser wavelength of 355 nm. Insulator areas contaminated by fungal growth could be distinguished from clean surfaces and readily be imaged. The experiments were supported by detailed spectral studies performed in laboratory using a fibre-optic fluorosensor incorporating an optical multi-channel analyser system (OMA) and a nitrogen laser emitting radiation at 33 7 nm.
composite materials
optical radar
fluorescence
biological technique
gas lasers
remote sensing by laser beam
insulators
nitrogen
surface contamination
microorganisms
fibre optic sensors
spectrochemical analysis
Författare
M Bengtsson
Lunds Universitet
R Grönlund
Lunds Universitet
M Sjöholm
Lunds Universitet
C Abrahamsson
Lunds Universitet
Andreas Dernfalk
Chalmers, Material- och tillverkningsteknik, Högspänningsteknik
S Wallström
The Royal Institute of Technology (KTH)
Anders Larsson
Totalforsvarets forskningsinstitut
P. Weibring
National Center for Atmospheric Research
S Karlsson
The Royal Institute of Technology (KTH)
Stanislaw Gubanski
Chalmers, Material- och tillverkningsteknik, Högspänningsteknik
S Kröll
Lunds Universitet
S Svanberg
Lunds Universitet
Optics and Lasers in Engineering
0143-8166 (ISSN)
Vol. 43 6 624-632Ämneskategorier (SSIF 2011)
Materialteknik
Elektroteknik och elektronik
DOI
10.1016/j.optlaseng.2004.09.019