Nanofibrillated cellulose reinforced acetylated arabinoxylan films
Artikel i vetenskaplig tidskrift, 2014

In this study, acetylated rye arabinoxylan (AcAX) films were reinforced with nanofibrillated cellulose from spruce (NFC) ranging from I to 10 wt% of the total composition. Free-standing composite films were casted without the use of any plasticizers. The homogeneous dispersion of NFC in the films was confirmed with scanning electron microscopy. The ultimate strength and the Young's modulus determined by tensile tests increased from 65 MPa and 2190 MPa for neat AcAX films to 93 MPa and 3360 MPa for the 10% composite films, respectively. The elongation to break of the 10% NFC composite film was a remarkable 10.5%. The moisture absorbed was still less than 8 wt% for the films with 10% NFC content at 97% relative humidity at room temperature, which is low for hemicellulose-based films. The addition of NFC decreased the water permeability of the films at low NFC contents, which was studied in diffusion cells using radioactive labeled water. Thus NFC can be used in an unmodified form as reinforcement in AcAX films to prepare films or coatings that are more water and humidity resistant than neat hemicellulose-based films. (C) 2014 Elsevier Ltd. All rights reserved.

SPRUCE

MICROFIBRILLATED CELLULOSE

WATER

Biobased composite

COMPOSITES

Flexible composites

1987

NANOFIBERS

ROM G

HIGH TOUGHNESS

Composites

Materials Science

JOURNAL OF COLLOID AND INTERFACE SCIENCE

V119

Thermomechanical properties

OXYGEN BARRIER FILMS

Transport properties

HEMICELLULOSES

P352

SURFACE

NANOCOMPOSITES

Nanocomposites

Författare

Agnes Stépán

Chalmers, Kemi- och bioteknik, Polymerteknologi

F. Ansari

Chalmers University of Technology

The Royal Institute of Technology (KTH)

L. Berglund

Chalmers University of Technology

The Royal Institute of Technology (KTH)

Paul Gatenholm

Chalmers, Kemi- och bioteknik, Polymerteknologi

Composites Science and Technology

0266-3538 (ISSN)

Vol. 98 72-78

Ämneskategorier (SSIF 2011)

Nanoteknik

DOI

10.1016/j.compscitech.2014.04.010

Mer information

Skapat

2017-10-07