Design of Transition from Coaxial Line to Ridge Gap Waveguide
Paper in proceeding, 2009
This paper presents the design of a simple transition from ridge gap waveguide to coaxial line transition. First, a straight ridge gap waveguide with single transition on end is simulated. Then a ridge gap waveguide with two 90° bends is simulated with two transitions on each end. Available commercial FDTD simulation tool was used to design the transitions. A return loss of -10 dB was achieved over the frequency band of 12- 15.75 GHz.
Author
Ashraf Uz Zaman
Chalmers, Signals and Systems, Kommunikationssystem, informationsteori och antenner
Eva Rajo
Chalmers, Signals and Systems, Kommunikationssystem, informationsteori och antenner
E. Alfonso
Universitat Politècnica de València
Per-Simon Kildal
Chalmers, Signals and Systems, Kommunikationssystem, informationsteori och antenner
2009 IEEE International Symposium on Antennas and Propagation and USNC/URSI National Radio Science Meeting, APSURSI 2009; North Charleston, SC; United States; 1 June 2009 through 5 June 2009
1522-3965 (ISSN)
9781424436477 (ISBN)
Subject Categories (SSIF 2011)
Electrical Engineering, Electronic Engineering, Information Engineering
DOI
10.1109/APS.2009.5172186
ISBN
9781424436477